 |
1 HP PanCake Air Compressor With 2 Gallon Tank
Features: 2 Amps. Outlet 1/4" NPT. Tank Size: 2 Gallon. Power Supply: 110V/60 Hz. Maximum Pressure: 115 PSI. Air Delivery At 40 PSI 3.8 CFM. Air Delivery At 90 PSI 2.4 CFM.
click here for more info |
|
 |
1 inch Hammer Drill With Case, Color May Vary
This device works as a drill or rotary hammer drill. It is equipped with a SDS-plus attachment system and uses SDS drill bits. 1 Pc Cold Chisel. 2 Pcs Masonry Drill Bit. Keyless Snap On Chuck. Blow Molded Carrying Case. Instructional Manual Enclosed. Includes: Deep Gauge Side Handle Carbon Brush. Features: Voltage: 110 Volt. Frequency: 60 Hz. Motor Power: 600 Watts. Concrete Capacity: 1". Rotary Speed: 450 RPM. No Load Speed: 850. Impact Frequency: 2900 r/min. *Color May Vary.
click here for more info |
|
 |
1 Ton Chain Hoist
Features: 8ft Lift Capacity. 1 Ton Lift Power. 1/4" Diameter Chain. Heat Treated Steel Safety Latch Hooks. Safe Easy And Efficient Lifting Operations. Drop Forged Hardened Steel Construction. Mechanical Load Brake For Positive Load Control.
click here for more info |
|
 |
1/2 HP Centrifugal Water Pump H.D.
Features: Flow: 40L/min. Metal housing. Suction max : 9M. Heavy duty motor. Voltage:115/60 Hz. Input power 370 watts. 1/2 horse power motor. Nozzle dimension inlet/outlet 1" x 1". Discharge head max: 40M. CE certified.
click here for more info |
|
 |
1/2 Inch Electric Impact Wrench
Features: Voltage: 120 Volt. Frequency: 60 Hz. Double Insulated. Max Torque: 235 Ft/lb. Rated Current: 7 Amp. Motor Power: 700 Watts. No Load Speed: 2100 rpm / 2700 BPM. Hits Bolt With: 240 Ft/Lbs Of Force. Forward / Reverse Switch. Socket Size: 11/16" 3/4" 13/16" 7/8".
click here for more info |
|
 |
1/2 inch Impact Hammer Drill
Chuck Size: 1/2". Power: 600 Watts. Voltage: 110V. Frequency: 60 Hz. Speed: 2200/2800 RPM. Impact Times: 38400/min. Double Insulation. Reversible. Built In Level And Belt Hook. MSRP: $89.99.
click here for more info |
|
 |
1/2" Air Impact Wrench
Features: Air Inlet: 1/4". Square Driver: 1/2". Overall Length: 7". Max Torque: 240 ft/lb. Free Speed: 7000 RPM. Air Consumption: 4.5 CFM. Minimum Hose Size: 3/8". Operation Pressure: 90 PSI.
click here for more info |
|
 |
1/2" Air Impact Wrench Kit with Case
Contents: 1 piece nipple. 1 piece oil pot. 1 piece mini oilier. 1 piece quick fitting. 1 piece hex key wrench: 4 mm. 1 piece 1/2" Dr. 5" extension bar. 1 piece blow mold protective carrying case. Includes 10 pieces 1/2" Dr. impact sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1". Features: Air inlet: 1/4". Free speed: 7000 RPM. Max torque: 240 ft/lb. Air consumption: 4 CFM. Minimum hose size: 3/8". Operation pressure: 90 PSI.
click here for more info |
|
 |
1/2" Clicker Torque Wrench With Case
Features: Length: 18". Drive: 1/2. Torque Range: 10 To 150 ft. lbs. Includes Blow Mold Carrying Case. With 1/2" And 3/8" Adapter And 5" Extension.
click here for more info |
|
 |
1/2" Dr. Twin Hammer Air Impact Wrench Heavy Duty
Specifications: Square drive: 1/2". Maximum torque: 425 pounds. Torque range: 25-300 foot/pounds. Average air consumption: 4.2 CFM. Maximum speed: 7000 RPM. Standard bolt capacity: 9/16". Overall length: 7-1/4". Impacts: 1200 RPM. Air inlet: 1/4" NPT.
click here for more info |
|
 |
1/4 inch Electric Trimmer (Mini Router)
Features: 1 pair wrenches. 1 pair carbon brushes. No load speed: 30000 RPM. 1 piece sample gauge for guiding plate. 1 piece taper clamping container. Includes instruction manual. Voltage: 110/60HZ. Power: 440 watts.
click here for more info |
|
 |
1/4" Air Die Grinder
Great For Production Work Deburring And Finishing Fabricated Metal: Features: Air Inlet: 1/4". Length: 6-7/8". Minimum Hose: 3/8". Air Consumption: 4 CFM. No Load Speed: 22000 RPM. Operation Pressure: 90 PSI.
click here for more info |
|
 |
1/4" Right Angle Air Die Grinder
Features: Collet Size: 6mm. Air Inlet: 1/4" NPT. Air Consumption: 4 CFM. Max. Speed: 20000 RPM. Minimum Hose Size: 3/8". Required Pressure: 90 PSI. Color May Vary.
click here for more info |
|
 |
10 inch Compound Miter Saw
Features: Electric Brake. Voltage: 110 V. Frequency: 60 Hz. Cut at: 0 to 45 Degrees. No Load Speed: 4600 rpm. Blade Arbor: 1" (25.4 mm). Power: 1650 Watts (15 Amps).
click here for more info |
|
 |
10 inch Compound Sliding Miter Saw With Laser Guided
Powerful 1800 Watt 10 Inch Compound Miter Saw with Laser Guide For An Amazingly Accurate Cut: Features: Laser equipped for amazingly accurate cutting. Powerful 1800 Watt hi-tech motor for excellent performance and long tool life. Independent extra long ball bearing arbor adds greater cutting stability and accuracy. Large 11-1/2" diameter table has positive stops at 0 degree 15 degree 22 degree 30 degree and 45 degree right. Bevel scale has stops at 0 degree and 45 degree for quick setting of common compound angels. Easy adjustable sliding function. Cuts cleanly with dust bag. 5000 RPM for fast and efficient cutting in wood plastic and aluminum: Specifications: 5000 RPM. 110 V/60 Hz. Arbor 5/8''. Electric brake. 11 amp motor. 1 3/4 horsepower. Positive stops: 0 22-1/230 and 45. UL Listed.
click here for more info |
|
 |
10 Inch Corded MITER SAW with Adjustable Bevel
Features: 15 AMP Double Insulated Motor with Electric Brake (4600 RPM). Aluminum Construction. Externally Accessible Brushes (includes 2 replacement brushes). Arbor Lock for Easy Blade Changes. Ergonomically Designed Trigger Switch for Comfort. Scaled Fence for Repetitive Cuts. Rugged Lightweight Aluminum Construction. Carrying Handle for Portability. 9 Positive Miter Stops at: 0° 15° 22.5° 30° and 45° right & left. Cutting Capacity: 90° Cut Off (2-5/8 x 5-3/4); 45° Miter right & left (2-5/8 x 4). Adjustable Bevel up to 45°. Pre-Drilled Base Holes for Bench Mounting and Screw Holes for Easy Jobsite Mounting. Safety Power Switch. Metal Safety Peg Locks Unit in Down Position. Dust Bag Included. Blade Changing Wrench Included. Instruction Manual Included. Note: Blade Not Included.
click here for more info |
|
 |
10 Pcs Angle Grinder Kit
This device is great for removing burrs from metal parts beveling and finishing weld seams cutting thin wall tubes and small metal materials. This angle grinder is designed for use on bulky pieces or in tight spaces: Contents: 4-1/2" Angle Grinder. 4-1/2" x 5/8" Wire Wheel Brush. 4-1/2" x 5/8" Backing Pad. 4-1/2" x 7/8" Cutting Wheel. 4-1/2" x 7/8" Grinding Wheel. Features: Voltage: 120V. Frequency: 60 Hz. Current: 4.2 AMP. No Load Speed: 11000 RPM. Double Insulation. Note: Color May Vary.
click here for more info |
|
 |
10 Piece Heavy Duty Paint Brush Set
Features: Suitable for all types of paints. Made of high quality polyester. Retail package in a plastic holster display. Feathered ends holds paint for a professional application. Included 2 pieces each : 1", 1-1/2", 2", 2-1/2", and 3".
click here for more info |
|
 |
10 Piece Spring Clamp Set
Features: Heavy Duty. Tempered Spring. Vinyl Covered Tip. Includes 4 Pcs 4" Clamp. Includes 4 Pcs 6" Clamp. Includes 2 Pcs 9" Clamp. Comfortable Plastic Handle.
click here for more info |
|
 |
10 Ton Hydraulic Porta Power
Specifications: Max lifting height: 5.3". Working pressure: 9137 PSI. Includes: Flat base. Jack hose. 10 ton ram. Wedge head. Male connector. Spreader ram. Hydraulic pump. Serrated saddle. Extension bars (4' total). Flex rubber head. Blow-molded case with wheels. Spreader ram toe. Spreader plunger toe. Case dimensions: 37"L x 15"W x 7"H.
click here for more info |
|
